Changes between Version 92 and Version 93 of u/erica/CFRunStatsHighRes

Timestamp:

09/23/14 22:42:43 (10 years ago)

Author:

Erica Kaminski

Comment:

—

u/erica/CFRunStatsHighRes

@@ -13 +13 @@
 
 
+For orientation, here is an image that shows the flows and tilted interface, 
 
-Here is a table for each of of the three column density maps for these runs. 'Down-the-barrel' denotes integration down the barrel of the colliding flows. 'Down-x' and 'Down-y' denote integration down the 2 perpendicular axes to the flow. The field is initialized to be parallel to the incoming flow, and is both in the cylinder as well as the ambient. 
+[[Image(box_orientation.png, 40%)]]
+
+
+
+Below is a table for each of of the three column density maps for these runs. 'Down-the-barrel' denotes integration down the barrel of the colliding flows. 'Down-x' and 'Down-y' denote integration down the 2 perpendicular axes to the flow. The field is initialized to be parallel to the incoming flow, and is both in the cylinder as well as the ambient. 
 
 The box sizes were chosen so to minimize backflow onto the inflow boundary in z, as this was found to occur in the higher shear cases. 
-
-For orientation, here is an image that shows the flows and tilted interface, 
-
-[[Image(box_orientation.png, 50%)]]
-
-
 ||              || '''Beta 1, Shear 60''' || '''Beta 10, Shear 0''' || '''Beta 10, Shear 15''' || '''Beta 10, Shear 30''' || '''Beta 10, Shear 60''' ||
 || '''down-the-barrel''' || [[Image(b1s60cdm10simple.png, 100%)]] || [[Image(b10noshearcdm10simple.png, 88%)]] || [[Image(b10s15cdm10simple.png, 100%)]] || [[Image(b10s30cdm10simple.png, 100%)]] || [[Image(b10s60cdm10simple.png, 100%)]] ||