wiki:u/bliu

Version 31 (modified by Baowei Liu, 10 years ago) ( diff )

Ablative RT Problem

Implementation in the code

2D Case

  • Growth rate
200 Extended Zones http://www.pas.rochester.edu/~bliu/AblativeRT/growthRate/GrowthLogVx_perid200.png;http://www.pas.rochester.edu/~bliu/AblativeRT/growthRate/InstantGrowthRate_200Ext.png; http://www.pas.rochester.edu/~bliu/AblativeRT/growthRate/growthRate_2D_rui.png; movie
5 Extended Zones movie

3D Case

  • Initial Profile from LLE
Original Doc parameters ; gravity=0.4*acceleration0
Original Data for thick Target density; pressure; temperature; Vx; Vy;Vz
Original Data for thin Target density; pressure; Vz
Thick Target Data files in text (normalized using parameters above, initial profile along z direction) density; pressure; temperature; Vx; Vy;Vz
Thin Target Data files in text (normalized using parameters above, initial profile along z direction) density; pressure; Vz
Thick Target: Initial Profile along center line http://www.pas.rochester.edu/~bliu/AblativeRT/3Dcase/initialProfile/init_Profile.png
Thick Target Results from AstroBEAR (fixed grid http://www.pas.rochester.edu/~bliu/AblativeRT/3Dcase/2ndCut/ThickSec0499.png; movie1; movie2;
Thin Target: Initial Profile along center line http://www.pas.rochester.edu/~bliu/AblativeRT/3Dcase/ThinTarget/initialProfile_thin/init_Profile_thinTarget.png
Thin Target Results from AstroBEAR (fixed grid) http://www.pas.rochester.edu/~bliu/AblativeRT/3Dcase/2ndCut/ThinSec0340.png; movie;
Thin Target Results from AstroBEAR (Coarse grid and AMR) http://www.pas.rochester.edu/~bliu/AblativeRT/3Dcase/CoarseGrid/test/CoarseGrid_1AMR_test_dt.png; 1 level AMR; 3 levels AMR;3 levels AMR with mesh

Scripts

Collects for useful linux scripts & codes

Interpolate from fine grids to coarse grids with AstroBEAR blog:bliu08282014 Set Info%ErrFlag to be 1; Read in data and set as level 1 AMR grid instead of 0
cherry pick the values for specific time steps transfer gravity; pick up gravity values around ts
hdf5 data to txt HDF5 to ASCII; ASCII to TXT; The hdf5 files need to be from single-core runs
Read in chombo files with multi-processors and reWrite the same frame using single-core. Useful when transferring hdf5 files to txt files. scrambler.f90; subst for run-directory; script; Replace the scrambler.f90 file with the new one. The frame number in script need to be updated. 8.19.2014
Multi_Data to Multi_Plots plot.sh gnuplot template Put the data files to ./Data and generate plots to ./PNGs with gnuplot
Scripts to transfer the hdf4 file to text on BH2 hdf4_to_ascii; combine_pos_var; combine_pos_var; combine_pos_var_v2 hdf4 module needed
Extended 2D data to 3D (Set Precisions!) SI along y;SI along z; cgs along z; Generate 3D initial data to testing the Ablative RT 3D module code. The initial profile is along y/z direction. Everything along z is same. 2D data in 2Ddata/ and 3D data generated in 3Ddata/

Tests

MyCurentTests

Note: See TracWiki for help on using the wiki.