Changes between Version 22 and Version 23 of u/bliu

Timestamp:

08/06/14 10:43:45 (10 years ago)

Author:

Baowei Liu

Comment:

—

u/bliu

@@ -16 +16 @@
 || Original Data for thick Target || [http://www.pas.rochester.edu/~bliu/AblativeRT/3Dcase/initialProfile/crho-0000000.hdf density]; [http://www.pas.rochester.edu/~bliu/AblativeRT/3Dcase/initialProfile/cprs-0000000.hdf pressure]; [http://www.pas.rochester.edu/~bliu/AblativeRT/3Dcase/initialProfile/ctpr-0000000.hdf temperature]; [http://www.pas.rochester.edu/~bliu/AblativeRT/3Dcase/initialProfile/cvl1-0000000.hdf Vx];  [http://www.pas.rochester.edu/~bliu/AblativeRT/3Dcase/initialProfile/cvl2-0000000.hdf Vy];[http://www.pas.rochester.edu/~bliu/AblativeRT/3Dcase/initialProfile/cvl3-0000000.hdf Vz] ||
 || Original Data for thin Target || [http://www.pas.rochester.edu/~bliu/AblativeRT/3Dcase/initialProfile_thin/crho-0000000.hdf density]; [http://www.pas.rochester.edu/~bliu/AblativeRT/3Dcase/initialProfile_thin/cprs-0000000.hdf pressure]; [http://www.pas.rochester.edu/~bliu/AblativeRT/3Dcase/initialProfile_thin/cvl3-0000000.hdf Vz] ||
-|| Scripts to transfer the hdf4 file to text on BH2 || [http://www.pas.rochester.edu/~bliu/AblativeRT/3Dcase/initialProfile/hdf4_2_asc.sh hdf4_to_ascii];  [http://www.pas.rochester.edu/~bliu/AblativeRT/3Dcase/initialProfile/run.sh combine_pos_var]; [http://www.pas.rochester.edu/~bliu/AblativeRT/3Dcase/initialProfile/trans2txt.cpp combine_pos_var]; [http://www.pas.rochester.edu/~bliu/AblativeRT/3Dcase/initialProfile/tran2txt_v2.cpp combine_pos_var_v2] ||
 || Thick Target Data files in text (normalized using parameters above) ||   [http://www.pas.rochester.edu/~bliu/AblativeRT/3Dcase/initialProfile/Rho3D.data density]; [http://www.pas.rochester.edu/~bliu/AblativeRT/3Dcase/initialProfile/P3D.data  pressure]; [http://www.pas.rochester.edu/~bliu/AblativeRT/3Dcase/initialProfile/T3D.data  temperature]; [http://www.pas.rochester.edu/~bliu/AblativeRT/3Dcase/initialProfile/Vx3D.data  Vx];  [http://www.pas.rochester.edu/~bliu/AblativeRT/3Dcase/initialProfile/Vy3D.data  Vy];[http://www.pas.rochester.edu/~bliu/AblativeRT/3Dcase/initialProfile/Vz3D.data  Vz] ||
 || Thin Target Data files in text (normalized using parameters above) ||   [http://www.pas.rochester.edu/~bliu/AblativeRT/3Dcase/initialProfile_thin/Rho3D.data density]; [http://www.pas.rochester.edu/~bliu/AblativeRT/3Dcase/initialProfile_thin/P3D.data  pressure]; [http://www.pas.rochester.edu/~bliu/AblativeRT/3Dcase/initialProfile_thin/Vz3D.data  Vz] ||
@@ -25 +24 @@
 = Scripts =
 Collects for useful linux scripts & codes
+|| cherry pick the values for specific time steps || [http://www.pas.rochester.edu/~bliu/Scripts/gravity.cpp  transfer gravity]; || pick up gravity values around ts ||
+|| hdf5 data to txt ||[http://www.pas.rochester.edu/~bliu/Scripts/hdf5_2_asc.sh  HDF5 to ASCII]; [http://www.pas.rochester.edu/~bliu/Scripts/trans2txt.cpp ASCII to TXT]; || The hdf5 files need to be from single-core runs || 
 || Multi_Data to Multi_Plots || [http://www.pas.rochester.edu/~bliu/Scripts/plot/plot.sh plot.sh] [http://www.pas.rochester.edu/~bliu/Scripts/plot/gnuplot.inc gnuplot template] || Put the data files to ./Data and generate plots to ./PNGs with gnuplot ||
+|| Scripts to transfer the hdf4 file to text on BH2 || [http://www.pas.rochester.edu/~bliu/AblativeRT/3Dcase/initialProfile/hdf4_2_asc.sh hdf4_to_ascii];  [http://www.pas.rochester.edu/~bliu/AblativeRT/3Dcase/initialProfile/run.sh combine_pos_var]; [http://www.pas.rochester.edu/~bliu/AblativeRT/3Dcase/initialProfile/trans2txt.cpp combine_pos_var]; [http://www.pas.rochester.edu/~bliu/AblativeRT/3Dcase/initialProfile/tran2txt_v2.cpp combine_pos_var_v2] || hdf4 module needed ||
+|| Extended 2D data to 3D || [http://www.pas.rochester.edu/~bliu/Scripts/2Dto3D_alongy.cpp SI along y];[http://www.pas.rochester.edu/~bliu/Scripts/2Dto3D.cpp SI along z]; [http://www.pas.rochester.edu/~bliu/Scripts/2Dto3D_cgs.cpp cgs along z];  || Generate 3D initial data to testing the Ablative RT 3D module code. The initial profile is along y/z direction. Everything along z is same. 2D data in 2Ddata/ and 3D data generated in 3Ddata/ ||
 
 [[CollapsibleStart(Tests)]]