Version 5 (modified by 10 years ago) ( diff ) | ,
---|
Ablative RT Problem
Docs from LLE
Implementation in the code
- Important Equations and Parameters:new equations; bliu01092014 and bliu01142014
- Stencils for diffusion solver: [ThermalConduction]
- Transfer the initial data to coarse grid with AstroBEAR and so it can take advantage of AMR: bliu08282014
Conduction Front Test
- Docs: Reale 1994; pdf unit and parameters etc.; tex unit and parameters etc.;
- Pure conduction front test:
AstroBEAR | |
Reale paper |
Hydro Temperature | |
Hydro Density | |
Hydro Vx | |
Reale Paper |
2D Case
- Growth rate
200 Extended Zones | ;; ; movie |
5 Extended Zones | movie |
3D Case
- Initial Profile from LLE
Original Doc | parameters ; gravity=0.4*acceleration0 |
Original Data for thick Target | density; pressure; temperature; Vx; Vy;Vz |
Original Data for thin Target | density; pressure; Vz |
Thick Target Data files in text (normalized using parameters above, initial profile along z direction) | density; pressure; temperature; Vx; Vy;Vz |
Thin Target Data files in text (normalized using parameters above, initial profile along z direction) | density; pressure; Vz |
Thick Target: Initial Profile along center line | |
Thick Target Results from AstroBEAR (fixed grid | ; movie1; movie2; |
Thin Target: Initial Profile along center line | |
Thin Target Results from AstroBEAR (fixed grid) | ; movie; |
Thin Target Results from AstroBEAR (Coarse grid and AMR) | ; 1 level AMR; 3 levels AMR;3 levels AMR with mesh |
Note:
See TracWiki
for help on using the wiki.