Changes between Version 50 and Version 51 of 1DPulsedJets


Ignore:
Timestamp:
03/30/12 13:24:01 (13 years ago)
Author:
ehansen
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • 1DPulsedJets

    v50 v51  
    272272A run with no cooling was done to make sure the post-shock values were correct.  With no cooling (adiabatic), the hydrodynamic quantities should jump discontinuously at the shock, and then remain constant while the shock itself remains stationary.  Only the first 100 cells of the simulation are shown here.
    273273
    274 ||= Adiabatic =||
     274|| Adiabatic ||
    275275|| [[Image(ad_press0000.png, width=400)]] || [[Image(ad_temp0000.png, width=400)]] ||
    276276||= [attachment:ad_press.gif Pressure Movie] =||= [attachment:ad_temp.gif Temperature Movie]
    … …  
    280280Then, a run with the aforementioned analytic cooling parameters was done.  The hydrodynamic quantities will change discontinuously at the shock as before, but then change continuously according to the cooling rate.  The ambient temperature is set to be the floor temperature, so that no cooling occurs at or below this temperature.  Once the post-shock temperature reaches this floor temperature, the hydrodynamic quantities will remain constant.  This is called the quiescent region.  Only the first 100 cells of the simulation are shown here. 
    281281
    282 ||= Analytic Cooling =||
     282|| Analytic Cooling ||
    283283|| [[Image(an_press0000.png, width=400)]] || [[Image(an_temp0000.png, width=400)]] ||
    284284||= [attachment:an_press.gif Pressure Movie] =||= [attachment:an_temp.gif Temperature Movie]