Meeting Update 0217

  • Laser Simulations

Simulation setup (2D):

http://www.pas.rochester.edu/~shuleli/laserclump/laserclump_hydro_setup.png

Wtih 2 mm ablator (contour shows the target material tracer):
http://www.pas.rochester.edu/~shuleli/laserclump/images/laserclump_0090.png

​2 mm ablator movie

With 10 um ablator initial setup:
http://www.pas.rochester.edu/~shuleli/laser_0227/ablator_init.png

At 100 ns:
http://www.pas.rochester.edu/~shuleli/laser_0227/ablator_hydro.png

​10 um ablator hydro movie

Wtih 10 um ablator, Added 8 Tesla vertical magnetic field:
At 100 ns:
http://www.pas.rochester.edu/~shuleli/laser_0227/ablator_mhd.png

​10 um ablator mhd movie

Without ablator, hydro, single shock with the same shock speed (115 um/ns) initial setup:
http://www.pas.rochester.edu/~shuleli/laser_0227/shock_init.png

At 100 ns:
http://www.pas.rochester.edu/~shuleli/laser_0227/shock_hydro.png

​single shock hydro movie

Without ablator, hydro, single shock with half the shock speed (57 um/ns): At 200 ns (the time slider in the image should be doubled):
http://www.pas.rochester.edu/~shuleli/laser_0227/shock_hydro_slow.png

​single shock hydro half speed movie

Without ablator, added 8 Tesla vertical field, single shock with the same shock speed (115 um/ns):
At 100 ns:
http://www.pas.rochester.edu/~shuleli/laser_0227/shock_mhd.png

​single shock mhd movie

  • TSF

Revising the final version of the paper. Should be done by the end of this week.

  • Mgnetized TSF

Since we've decided to tackle the magnetized TSF next, I have migrated the low res runs on Kraken to bluestreak. We should get the set of production runs we need after these runs are done.

Comments

No comments.